Jeff Boston Auction Service, LLC

LOCATION: 2192 E. State Rd. 58, Carlisle, IN 47838

DIRECTIONS: From US 41 in Carlisle, IN take St. Rd. 58 east 3 miles to farm.

 To view catalog and register to bid,
visit bostoncentury.hibid.com 

INSPECTION: SATURDAY, NOVEMBER 16th from 9 AM to 3 PM EST

For info concerning the equipment, contact Gary Ready @ (812) 236-8824

NO Buyer's Premium!

Auctioneer's Note: I have been told by local farmers that Gary was known for maintaining, shedding and "pampering" his equipment.

Tractors: 1990 John Deere 4555 (8135-hrs); 1982 JD 4840 (5247-hrs); 1981 JD 4640 (8735-hrs); 1973 JD 4230 (1237 hrs on o/h); 1977 Case 1175; GRAIN HEADS / CARRIERS: 2010 JD 612C, 12R30 poly c.h.; 2010 JD 635F, 35' platform; UF 36' and 30' carriers; GRAIN HANDLING: (2) KB 387 gravity wagons w/ 13-T gears (nicest wagons I've ever sold); KB 490 cart; W.F. 61''x10'" and 61'x8" pto, swing-aways; KB 350, seed wagon; PLANTER & DRILLS: JD 1760, 12R30, front-fold w/ fert.; JD 750, 30' tandem, p.w. drill; Int. 5100, 12', p.w. drill; SPRAYING: Demco 3-pt, 60' hyd. double-fold spray boom; (2) Demco 200-gal each poly saddle tanks; TILLAGE: Great Plains 1300 subsoiler, 3-pt, 5-sh.; Yetter 3530, 30', 3-pt hoe; JD 200, 25' crumbler; Int. 490, 22' x 7½" disk; DMI 11-knife, NH3 appl.; (2) 12-sh. chisel plows; Trimble EZ-Guide 500 auto steer; GRAIN TRUCK: 1981 Int. 1800, 10-wh. w/ O.S. 20' steel bed, air bag tandem, air brakes, tarp, 3208 CAT V8, 5 & 2-spd.

CATALOG TEXT BELOW:

1 - 1977 Case 1175 "open station" 2WD, gear drive trans, 3-pt, 540-pto, (2) SCV's, great GoodYear 480-80R38 radials (NOTE: the pto is not working, true hours unknown, 122-pto hp, SN 8811803)

2 - John Deere pad weights ... X's the MONEY 

3 - Int. 5100, 12', pull-type, press wheel drill 21-hole x 7 ½", (SN 3785)

4 - Killbros 350, 200-bu. seed wagon w/ newer UF hyd. auger, tarp and hyd. power unit (NOTE: The motor is bad on the power unit, Gary just used the tractor hyds)

5 - Baldor 1.5-hp electric motor 1-ph, 230-V, 1725 RPM

6 - Westfield 61'x8" pto, swing-away auger model 80-61, w/ hyd. lift, low usage (always shedded)

7 - Full set of JD 643 metal cornhead snouts (good condition)

8 - Demco 3-pt, 60' hyd. double-fold spray boom on 20" centers w/ hyd raise

9 - Hiniker 8160 console, rebuilt

10 - 1973 John Deere 4230 2WD w/ C.A.H., "Quad Range", 3-pt, 540/1000 pto, (2) SCV's, (4) front weight pads, (3) pr of wheel weights, Firestone 18.4-34's, 100-pto hp (NOTE: 1237 hrs on engine overhaul, SN 8953)

11 - John Deere RM630 6R30, danish-tine cultivator (sold w/ rolling fenders that are not pictured)

12 - Krause 12', 12-sh, 3-pt chisel plow

13 - 30'x8" pto transport auger

14 - John Deere 1010, 20' field cultivator, 3-pt, hyd-fold w/ mtd. 3-bar harrow

15 - Int. 490, 22'x7½" finishing disk, hyd-fold w/ rear hitch & hyds, blades measure 20" (NOTE: left front wing gang axle is broken, "AS-IS"

16 - Baldor 1.5-hp electric motor 1-ph, 230-V, 1725 RPM 

17 - Westfield 61'x10" pto, swing-away auger, model MK100-61, w/ hyd. lift, low usage (always shedded)

18 - Demco 200-gal each poly saddle tanks w/ bracketry, always shedded (used on 40, 50 and 55 series JD) 

19 - Killbros 490 grain cart w/ roll tarp, recent new 23.1-26 rubber, comes w/ both small & large 1000 pto, shedded

20 - 1990 John Deere 4555 2WD w/ C.A.H., 15/4 "Powershift", 3-pt, lg 1000 pto, (3) SCV's, H.D. reversible fast hitch, (16) front weights, 18.4R42 Firestone 10-bolt radial duals, new batteries and alternator (NOTE: air seat not working, 157-pto hp, 8135-hrs, SN RW4555P004788)

21 - 1981 Int. 1800, 10-wheeler w/ Omaha Standard 20' steel bed, 60" sides, wood floor, rear cargo doors, air bag tandem, air brakes, tarp, 3208 CAT V8 diesel, 5 & 2-spd trans, runs good (true miles unknown) ... NOTE: On TITLED ITEMS Indiana State Law requires we collect Sales Tax at your state rate.

22 - DMI 11-knife, NH3 applicator (3-pt or pull-type) hyd-fold w/ Hiniker cooler, 8150 monitor, flow meter, servo and elec. shut-off valve, equipped w/ Yetter sealers

23 - Krause 1900, 22'x8" hyd-fold wing disk comes w/ parts incl (7) new bearings

24 - Outstanding Great Plains 1300 subsoiler no-till ripper, 3-pt, 5-shank x 30', light pkg, always shedded (has been over 500 to 600 acres total)

25 - 2010 John Deere 635F 35', "Hydra-Flex", poly grain platform, "Full Finger" w/ single point hyds (SN 736235) ... NOTE: Head ONLY

26 - John Deere suitcase weights ... X's the MONEY 

27 - Baldor 1.5-hp electric motor 1-ph, 230-V, 1725 RPM 

28 - John Deere 200, 25' crumbler w/ light pkg (nice)

29 - NIB, Hiniker NH3 cooler

30 - 1982 John Deere 4840 2WD w/ C.A.H., "Powershift", 3-pt, lg. 1000 pto, (2) SCV's + Power Beyond, H.D. reversible fast hitch, (16) front weights, (2) pr of wheel weights, 20.8-38, 10-bolt duals, new batteries (181-pto hp, 5247-hrs, SN 015508)

31 - (5) new IH 490 disk bearings (part # B21357R) 

32 - Demco 200-gal each poly saddle tanks w/ bracketry, always shedded (used on 40, 50 and 55 series JD) 

33 - John Deere 1760 Max Emerge 2, 12R30 "Conservation" planter, front hyd-fold, set up for 2x2 fert, Yetter row cleaners, ripple no-till coulters, Yetter 2x2 disc, Thompson spike closing wheels (also comes w/ orig. type closing wheels), hyd. markers, full set of corn finger pickup and bean cups, D.J. "Loop" monitor (SN 665120) ... NOTE: Plumbed for 2x2 and or pop up fert., no fert pumps

34 - Raven SCS-330 spray control console

35 - 2010 John Deere 612C, 12R30 poly cornhead w/ hyd. deck plates, aggressive rolls, (3) sensor, single point hyds (SN 735776) ... NOTE: Head ONLY, not used since 2021

36 - Hiniker 8160 full system spray console radar & more

37 - Chem Farm 12', 12-sh, pull-type chisel plow

38 - Outstanding Killbros 387 gravity wagon w/ tip tops, (2) speed door, roll tarp, sight glasses, KB 1396-13-T H.D. running gears, 385 / 65R22.5 rubber, extendable tongue, rear hitch, light pkg and 7-pin connector ... NOTE: 1-owner, always shedded, nicest wagon I've ever sold 

39 - Baldor 1.5-hp electric motor 1-ph, 230-V, 1725 RPM 

40 - New John Deere platform parts incl 2+ boxes of sections

41 - Outstanding, Yetter 3530, 30' rotary hoe, 3-pt, flat hyd-fold w/ light pkg (has been over 800 acres total)

42 - Unverferth HT36-36' carrier w/ extendable tongue and 22.5x8.0-12 rubber|... NOTE: Carrier ONLY

43 - New JD 635F platform parts incl. guards, sections and poly plates

44 - Hiniker 8150 console

45 - 1981 John Deere 4640 2WD w/ C.A.H., "Quad Range", 3-pt, lg 1000 pto, (3) SCV's, H.D. reversible fast hitch, (16) front weights, (1) pr of wheel weights, Agri-Max 480/80R42, 10-bolt radial duals (155-pto hp, 8735-hrs, SN 25387, NOTE: Hammerstrap on draw bar NOT included

46 - Mostly new and rebuilt John Deere planter parts

47 - New chisel plow points plus (1) shank, 2 1/8" center to center

48 - 3 ½ boxes of JD sections, nuts and bolts 

49 - John Deere 30' tandem, pull-type, press wheel drill w/ (2) 750, 15' x 7 ½" drills, Houck swing hitch and rainbow tarps (drill SN's are 17016 and 17429 ... sold complete)

50 - Unverferth HT30-30' carrier w/ extendable tongue and 7.50-10 rubber (NOTE: Carrier ONLY)

51 - Trimble Ag-Leader EZ-Guide 500 full system auto steer w/ foot switch, (2) antennas and mounting brackets 

52 - Outstanding, Killbros 387 gravity wagon w/ tip tops, (2) speed door, roll tarp, sight glasses, KB 1396-13-T H.D. running gears, 385 / 65R22.5 rubber, extendable tongue, rear hitch, light pkg and 7-pin connector ... NOTE: 1-owner, always shedded, nicest wagon I've ever sold 

53 - Hiniker 8160 full system spray console radar & more

54 - Good, JD 750 drill tongue

55 - DMC stirator advance motor and gear box

56 - John Deere suitcase weight 

58 - Mostly new JD 750 drill parts incl tires, gauge wheels, small press wheels, closing wheels, flex seed hoses, chains and more

59 - John Deere 1100, 20' field cultivator 3-pt, hyd-fold w/ mtd. 3-bar harrow (AS-IS, scrap & salvage)

TERMS: All items sold "AS IS, WHERE IS" regardless of faults. All descriptions believed accurate but not warranted. 7% Indiana Sales Tax will be collected, unless you are farm or dealer exempt, please bring your tax-exempt form or we will provide one for you. NO Buyer's Premium.

SHIPPING NOTE: This is a PICKUP ONLY AUCTION.

ALL ITEMS MUST BE SETTLED for on:
Friday, November 22nd, 9:00 A.M to 5:00 P.M. EST
Saturday, November 23rd, 9:00 A.M. to 1:00 P.M. EST
Loader will be available both days .... NOTE: We do NOT disassemble any equipment for hauling purposes.

LOCATION: 2192 E. State Rd. 58, Carlisle, IN 47838

DIRECTIONS: From US 41 in Carlisle, IN take St. Rd. 58 east 3 miles to farm.

Payment type accepted: Cash or Check w/ valid picture I.D. (if paying by check, make check payable to Boston Auctions); Visa or Mastercard w/ a 3% processing fee. NOTE: If you are paying by check and are out of state or unknown to the auction service, please bring a bank letter guaranteeing funds.

Location: 14656 E. 850th Ave., Robinson, IL 62454

Directions: from just east of Robinson (IL Rt 1 & 33, Gordon Junction) take Rt 1 south 2 miles to Co. Rd. 850 N, turn east and proceed ½ mile to farm.

Seller: Jeanne Rice

NO Buyer's Premium!

Auctioneers' Note: Mr. Rice did excellent maintenance and service on his mostly shedded, well cared for equipment.

1 - Soilmover 425RF dirt pan w/ front dolly wheels, 1-owner, low usage, thought to be 2/3 yd.

2 - New Holland S55, 10' ground driven hay rake (works good)

3 - Burch 12' H.D. disk, front blades 23 1/2", rear 24 1/2"

4 - 2007 L&D 12'+2' dove x 59" W, bumper hitch 1-axle trailer w/ mesh ramp, real good 225/75R15 radials and 4-pin connector w/ TITLE

5 - IH 784 diesel w/ IH 2250 Q.A. loader row crop tractor w/ 6' material bucket, 8 / 4 -spd, TA, 3-pt, pto, hyds, (1) pr of wheel weights and 15.5-38 rubber (3864-hrs, made from 1978 to 1984)

6 - Westfield MK100-61, 61'x10" pto swing-away auger w/ hyd lift

7 - 1992 Ford F250 XLT, regular cab, ¾-T, 2WD w/ 8' bed, 5.8L V8, auto, power equipment, tow pkg, 8600 GVW, recent new rubber, bedliner, 2-pc running boards (only 123k miles, good solid truck)

8 - Krause "Landstar" 6327-27' finish tool w/hyd. adj. front gang, 20" blades, rear spiders, harrow and rolling baskets (1-owner, bought new in '01)

9 - Fairbanks-Morse mod "Z", 118 pump motor

10 - 1988, 24'x8" tri-axle flatbed gooseneck trailer w/ ramps and TITLE

11 - 2012 CIH 8120 "Flagship" 4WD combine (PRE DEF), loaded w/ options incl. Premium cab w/ leather, Pro 700 display, "Lateral Tilt", rock trap, chopper, dual spreaders, power fold hopper, 22' auger, 2-spd rear axle, H.D. planetary w/ diff. lock, 10.4 axle extensions, pwr. mirrors, extended wear, HID lighting, Auto Guidance NAV II controller, 262 WAAS, Firestone 520/85R42, 10-bolt duals, F.S. 600/65R28 rear and much more (new batteries and oil cooler, 420-hp, only 1781 sep / 3008 eng hours, SN YBGZ13840)

12 - Dake heavy floor press (AS-IS)

13 - DMI 4250 Nutri-Placr, 13-knife NH3 applicator w/ Raven "AccuFlow" Super Cooler, rear covering discs and monitor

14 - 1979 Case 4890, 4x4 w/ CAH, 12/4 "Powershift", 3-pt, 1000 pto, (4) SCV's, Firestone 30.5L32 singles, 300-eng. hp, SN 8858744 (NOTE: new cab kit, cold A/C, I didn't get the 3-pt to lower, family said they never used the 3-pt, shows 2182-hrs, hour meter not working, tach does work)

15 - John Deere 712-16', 11 / 13 shank disc/chisel w/ 20 1/2" blades (SN 002932)

16 - Fairbanks-Morse mod "Z", 118 pump motor (green one is stuck)

17 - John Deere 1760 Max Emerge Plus 12R30, front fold, no-till vac planter w/ Ag Leader monitor w/ integrated row clutches, markers, insect. and corn units (1-owner, row clutch system, bought new in 2013 for $12k, planter bought new in 2004, always shedded, SN A01760F705111)

18 - John Deere 400-15', 3-pt rotary hoe

19 - CIH 3950, 28'x 7 ½" finishing disk, front blades 19 ½", rear 21 ¼" (1-owner, SN JAG0750328)

20 - Chem- Farm stainless saddle tanks

21 - 1991 CIH 9260, 4x4 w/ CAH, 12/3 "Powershift", 1000 pto, (4) SCV's, 20.8R38 Firestone radial duals, Cummins LTA-10 (300-hp, SN JCB0027290, only 4824-hrs, comes w/ new cab decals)

22 - 1993 Biltrite 14'+2' dove x 78" W, bumper hitch 2-axle trailer w/ brakes on both axles, 7-pin connector and brand new 225/75R15 radials on alloy spoke wheels w/ TITLE

23 - Kubota F3226 front mount sweeper attachment

24 - 2009 CIH 2162-30' Flex Draper head (low acres, SN Y9ZN11637) ... NOTE: head ONLY

25 - Outstanding 1975 Int. "Loadstar" 1700, single axle w/ 14' Midwest bed and hoist, steel floor, 52" sides, 404 V-8, 5 & 2-spd, near new Firestone 295/75R22.5's, swing out rear hitch, only 46,175 miles (1-family owned)

26 - 2005 CIH MX285, MFWD w/ CAH, 3-pt, fast hitch, (4) SCV's + P.B., 18 / 4 "Powershift" trans, lg 1000 pto, (1) lg pr of rear wheel weights, (10) front weights, 620/70R42 GoodYear radial 10-bolt duals, 16.9R30 GoodYear front radial duals, hammerstrap & instructor seat (PRE DEF, 285-hp, 5003-hrs, SN JAZ135574)

27 - Chem-Farm mix tank

28 - John Deere 1990 CCS air seeder "Central Fill", 30'x7 ½", cast iron closing wheels w/ JD SM500 monitor (11065 total acres, always shedded, SN A01990D720267)

29 - IH #55, 11 / 13 shank, 3-pt chisel plow

30 - Gerringhoff Northstar 12R30 folding corn head, model 1230, poly w/ hyd. deck plates, header height control and end row spirals (1-owner, bought new December 2013, approx. 4500 acres. total use, SN F7031101230FB)

31 - Hagie 284, 4x4, self-propelled sprayer 800-gal, 60' boom, A/C, Hydro drive, 5.9L Cummins diesel, 13.6R28 radials, Raven SCS460 spray control (3428-hrs, not used since 2011, starts, runs and moves)

32 - Outstanding Brent 782 grain cart w/ roll tarp, lg 1000-pto, 18' auger, hyd spout, Firestone 30.5L-32, 23°, light pkg, rear camera (1-owner, extremely low usage, they didn't have a person to operate the cart, it still has orig. red paint on the auger, SN B26030144)

33 - 1992 CIH 7120 2WD w/ CAH, 18/4 "Powershift", GoodYear 18.4R42 "Dyna-Torque" radial 10-bolt duals, (12) front weights, 3-pt, 540/1000 pto, (3) SCV's + P.B., hammerstrap (1-owner, only 3248-hrs, 152-pto hp, this tractor has only pulled a 12-row planter, very nice, SN JJA0045184)

34 - Feterl 66'x12" pto swing-away auger w/ hyd lift

35 - Brillion 25' flat-fold cultimulcher w/ scrapers (SN 155719)

36 - Bruning 3-box seed tender w/ Runeumatic grain vac w/ (2) remotes & 16-hp, V-twin B&S, electric start (1-owner, SN 593-1108)

37 - E-Z Trail 680-26' head carrier w/ 9.00-10 rubber, light pkg. and extendable tongue

38 - (6) rebuilt John Deere drill wheels w/ new tires and bearings

TERMS: All items sold "AS IS, WHERE IS" regardless of faults. All descriptions believed accurate but not warranted.NO Buyer's Premium

SHIPPING NOTE: This is a PICKUP ONLY AUCTION.

ALL ITEMS MUST BE SETTLED for on:
Friday, December 6th, 9:00 A.M to 5:00 P.M. Central
Saturday, December 7th, 9:00 A.M. to 1:00 P.M. Central
Loader will be available both days .... NOTE: We do NOT disassemble any equipment for hauling purposes.

Location: 14656 E. 850th Ave., Robinson, IL 62454

Directions: from just east of Robinson (IL Rt 1 & 33, Gordon Junction) take Rt 1 south 2 miles to Co. Rd. 850 N, turn east and proceed ½ mile to farm.

Payment type accepted: Cash or Check w/ valid picture I.D. (if paying by check, make check payable to Jeanne Rice); Visa or Mastercard w/ a 3% processing fee. NOTE: If you are paying by check and are out of state or unknown to the auction service, please bring a bank letter guaranteeing funds.